German | Contact | Jobs | Terms of Trade | Technical Terms | Imprint | Sitemap | FAQ  
 
| Home | German | Back | Print view | Recommend us |
Technical Terms of Delivery  
  Of Precoplat Präzisions-Leiterplatten-Technik GmbH (Revision: 01 of 01. Juli 2004)


 
 
1. Working days backtopbottom
 
  1.1
The day, on which the order and the complete production data are made available not later than 6 p.m., does not count as a working day. If the order and/or the production data are made available after 6 p.m., the first working day is t he day after next.

1.2
Technical preconditions: Productions data and orders which are faulty, incomplete, or vary from the details on which the offer is based lead to delays in delivery and/or incorrect execution of the order, etc.

 
2. Liability Disclaimer backtopbottom
 
  2.1
We do not accept responsibility for any errors incurred when referring to offers or when enquiring.

 
3. Correct Side backtopbottom
 
  3.1
In order to be able to recognise the correct side (mirrored or unmirrored image) legible type must be visible in an external position on the conductive pattern.

3.2
The order of layer construction must be given for multilayers. We are not liable for correct execution if we are not provided with this information.

 
4. Confusion backtopbottom
 
  We cannot accept liability for any incorrect execution of PCBs if a file description is not provided.

 
5. Conversion backtopbottom
 
  5.1
We are not liable for errors occurring as a result of converting Eagle-BRD files into gerber data.

 
6. Annular Ring backtopbottom
 
  6.1
To guarantee an adequate annular ring encircling plated-through drills, the pad should have a surround of at least 300µ around the hole.

 
7. Pad backtopbottom
 
  7.1
If non-plated holes are positioned on one pad, the pad must have a surround of at least 500µ larger than the hole. Otherwise some/all of the pads may be removed.

 
8. Solder Resists backtopbottom
 
  8.1
Please refrain from oversizing when drafting solder resists, i.e. the solder stop spaces are 1:1 to the pads. This facilitates the incorporation and required stretching of the solder resists during the manufacturing process.

 
9. Silkscreen backtopbottom
 
  9.1
In order to perfectly reproduce silkscreens, the type must be at least 1mm high and the stroke at least 200µ thick. Also, all surrounding solder areas must be clear of component print for at least 250µ or imperfect print and printed solder areas may result.

 
10. Non-plated Holes backtopbottom
 
  10.1
This refers to plated through PCBs: If we do not have any information from you as to which holes are to be plated-through and which are not, we will determine this to the best of our knowledge.
10.2
If non-plated holes are positioned in a pad, this pad must be bigger than the hole by at least factor 1.5. Otherwise some or all of the pads may be removed.

 
11. Data Provided (Data Inconsistency) backtopbottom
 
  11.1
If drilling and measurement plans are included that do not match the drilling program or the contour according to the gerber-data, then the drilling program and the gerber-data will be binding in all cases.

 
12. PCB Contour backtopbottom
 
  12.1
If not otherwise stipulated, the PCB contour will be determined by the centre (=centre vector) of the contour lines provided in the order data. If Slots are represented by you by rectangular outlines, then we assume generally that the corner radius is contained.

 
13. Technical Specifications backtopbottom
 
  13.1
For further technical specifications of our manufacturing processes, please refer to our Process & Capability Manual in the "Standard" category. These standard technical criteria also apply even if your manufacturing data and documents call for other features (special technical requirements are available in our Premium Jet Line).

 
14. UL Certification backtopbottom
 
  14.1
If the PCB is to be produced in line with our UL Certification, please follow the layout instructions..

 
15. Innerlayers backtopbottom
 
 

15.1
The minimum spacing of not plated through holes/plated through holes not surrounded by a pad to innerlayer copper must be at least 400 µ. The minimum spacing of the innerlayer copper to all outlines/edges must be at least 400 µ.

 
| Precoplat Präzisions-Leiterplatten-Technik GmbH resident in 47877 Willich-Germany |
| Registered at the Krefeld District Court | Registration No. HRB 1444 | VAT-ID-No.: DE 120 156 920 |
| Management: Hildegard Völker & Andreas Brüggen | Post Address: 47805 Krefeld, Oberdiessemer Strasse 15 |
| Telephone: ++49 (0) 21 51 825 1 | Telefax: ++49 (0)21 51 932 450 | eMail: infotern@precoplat.com |

Login | Contact | Management | Imprint | Provider Identification | Terms of Trade | Technical Terms |
Data Protection  | Registration | Sitemap | Newsletter | Recommend us |
Online-Ordering | Print | FAQ |
 
Tuesday, October 24, 2017