Multilayer Boards Services Immersion tin can be seen as a viable alternative for Printed Circuit Boards (PCBs)

... to deal with because they have to worry about translators and parsers to read the aperture table information. As a result, aperture data might | MULTILAYER BOARDS SERVICES | be misinterpreted. Worse, someone might have typed in the information manually - and erroneously. By contrast, in 274X, all the aperture information is contained within | MULTILAYER BOARDS SERVICES | the Gerber file, which can be read by most CAM tools automatically. For netlists, IPC-D-356 is the preferred format for fabrication. It's widely used by | MULTILAYER BOARDS SERVICES | many of the bare-board test-fixturing machines and is one of the only true ways to identify power- to-ground shorts. With the information in this format | MULTILAYER BOARDS SERVICES | coming directly from the engineering CAD system, there's no danger of the fabricator "reverse engineering" the netlist from the Gerber files. Next up are the | MULTILAYER BOARDS SERVICES | internal plane layers. For some reason, CAD engineers like them to be "positive," but those types of layers lead to huge file sizes. Negative plane | MULTILAYER BOARDS SERVICES | layers are usually preferred by fabricators because they're easier to ...
[ Multilayer Boards Services ]


... ablation, in which the higher-energy UV photons literally sever the chemical bonds of the absorbing material. Photochemical ablation forms cleaner microvias, while photothermal ablation | MULTILAYER BOARDS SERVICES | creates more debris in and around the microvia that must be removed. However, the debris is non-tenacious and is easily removed by conventional cleaning techniques | MULTILAYER BOARDS SERVICES | such as permangate desmear. Regardless of the ablation mechanism, high peak powers and short laser pulses give the best microvia results. Each material has a | MULTILAYER BOARDS SERVICES | unique ablation threshold, above which vaporization occurs for a given wavelength and laser fluence (energy/area). | MOST LASER-BASED SYSTEMS | are typically configured for direct | MULTILAYER BOARDS SERVICES | microvia formation, which means that each microvia is drilled one at a time at high speed. With this technique, the size of the focused laser | MULTILAYER BOARDS SERVICES | beam usually defines the size of the microvia or the drilling speed or both. UV lasers often produce the smallest focal spots (5 to 20 | MULTILAYER BOARDS SERVICES | microns in diameter), and ...
[ Multilayer Boards Services ]


... Preferred in Gerber® format although accepted in other formats. (Refer to CID-014 for information on Documentation in Digital Form). PHOTOPLOTS OR PHOTOPLOT files are | MULTILAYER BOARDS SERVICES | the only acceptable form of supplying images for multilayers and boards with fine (0.2mm or smaller) tracks. DRAWINGS Drawings must be supplied with each new | MULTILAYER BOARDS SERVICES | job and should contain the following information to ensure that the finished board is to your requirements. HOLE SIZES Always required even when a drill | MULTILAYER BOARDS SERVICES | file is supplied, to enable inspection of panels immediately after drilling and finished boards prior to despatching. Hole sizes must be clearly represented with distinct | MULTILAYER BOARDS SERVICES | differences between each size. Tolerances are not required unless different to our standard of +0.1 / -0.05 mm. MECHANICAL SIZES Preferred with overall mechanical dimensions | MULTILAYER BOARDS SERVICES | including notches, cutouts and slots. Also preferred is a positioning (datum) dimension (drilled hole is best). Tolerances are not required unless different to our ...
[ Multilayer Boards Services ]